How to use

Shake container before use. Remove surface contamination. Surface should be clean, free from dust, dirt, oil, efflorescence, organic growth, coatings and sealers. All algae and mould should be treated and removed using ProtectiT Surface Reviver before application.

1. Ideally apply using a sprayer (incl power assisted), alternatively you can use a brush or roller.
2. Always apply this product from the bottom up and NOT the top down.
3. The surface should be impregnated to saturation point, recommended one to three applications ‘wet-on-wet’. DO NOT allow the product to dry in between applications. Avoid runs, drips or pooling by removing excess product from the surface.
4. Remove as much excess product from your tools as possible and clean equipment with soapy water.

• DRYING: Water and stain resistance is evident after initial curing but may take up to 7 days to reach 100% efficiency.
• COVERAGE: 1 litre will cover 4 – 10m²
  (depending on porosity and texture of the surface)