How to use

Shake the closed container for 30 seconds before use.

1. Wet the area to be treated with water.
2. Use Concrete Remover directly from its container, do not dilute or mix with other products. Spray evenly over the contaminated area, using a low pressure sprayer.
3. Apply a generous amount of Concrete Remover to saturation point when cleaning off cement and concrete residuals that are old and thick.
4. Keep the surface soaked for 30-40 minutes. Do not allow the treated surface to dry out during the treatment stage, if it does simply re-saturate the area.
5. After treatment, scrub treated area with a hard-bristle brush if necessary.
6. Rinsing off thoroughly using a low pressure water jet or spray.
7. Repeat the process for any particularly stubborn areas until all residues are dissolved.