How to use

1. Ensure surface is clean, dry and dust free, remove any stains before application. Shake container well before use, do not dilute and do not mix with another product. The treated surface should be impregnated to saturation point, either in one, two or three applications ‘wet-on-wet’ to give desired finish.
2. Apply using a brush or roller ensuring an even coat. Avoid any runs, drips or puddling by removing excess product from the surface during application. Do not allow the product to dry between coats.
3. Allow up to 4 hours drying time. Allow the product to cure overnight before subjecting to heavy traffic. Clean equipment with soapy water after use.

COVERAGE: 1 Litre will cover 4 – 6m²
(depending on porosity and texture of the surface)